phone: 800-867-2717 fax: 763-531-8235 132 tact switches navigation switches pushbutton switches toggle switches rocker switches slide switches snap-action switches dip switches keylock switches rotary switches detector switches cap options specifications subject to change without notice. example ordering number 200a _ wmsp2 _ t1 _ a1 _ vs2 _ q _ e specifications contact rating: dependent on contact material life expectancy: 50,000 make-and-break cycles at full load contact resistance: below 20 m typ. initial @ 2-4 vdc, 100 ma, for both silver and gold plated contacts insulation resistance: 1,000 m 1 min. dielectric strength: 1,000 v rms min. @ sea level operating temperature: -30 c to 85 c seal rated: ip67 materials case & bushing: glass filled nylon, flame retardant, heat stabilized (ul 94-v0) actuator: brass, chrome plated, internal o-ring seal standard for all actuators switch support: brass, tin plated contacts / terminals: silver or gold plated copper alloy terminal seal: epoxy how to order features & benefits variety of switching functions sub-miniature multiple actuator & bushing options sealed to ip67 applications/markets telecommunications instrumentation networking medical equipment spdt ( ) = momentary pos 1 pos 2 pos 3 model no. wmsp-1 on none on wmsp-2 on none (on) wmsp-3 on off on wmsp-4 (on) off (on) wmsp-5 on off (on) term. comm. 2 - 3 open 2 - 1 wmsp-6 off none on term. comm. open none 3-1 schematic pos 1 pos 2 pos 3 epoxy seal *only available with m2 or vs2 termination series 200a t1 t2 actuator m2 m6 m61 m7 vs2 termination q = silver r = gold contact material seal e e = epoxy sealed at base of terminal a1 bushing wmsp1 wmsp2 wmsp3 wmsp4 wmsp5 wmsp6 * wmdp1 wmdp2 wmdp3 model no. series 200a switches toggle switches - sub-miniature
www.e-switch.com info @ e-switch.com 133 tact switches navigation switches pushbutton switches toggle switches rocker switches slide switches snap-action switches dip switches keylock switches rotary switches detector switches cap options pos 1 pos 2 pos 3 25? dpdt ( ) = momentary pos 1 pos 2 pos 3 model no. wmdp-1 on none on wmdp-2 on none (on) wmdp-3 on off on term. comm. 2-3,5-6 open 2-1,5-4 schematic actuator options bushing options termination options t2 a1 t1 m2 p.c. mounting
phone: 800-867-2717 fax: 763-531-8235 134 tact switches navigation switches pushbutton switches toggle switches rocker switches slide switches snap-action switches dip switches keylock switches rotary switches detector switches cap options m7 m6 m61 m6 spdt spdt snap-in bracket dpdt spdt p.c. mounting p.c. mounting p.c. mounting p.c. mounting series 200a switches toggle switches - sub-miniature
www.e-switch.com info @ e-switch.com 135 tact switches navigation switches pushbutton switches toggle switches rocker switches slide switches snap-action switches dip switches keylock switches rotary switches detector switches cap options m7 vs2 vs2 dpdt spdt dpdt p.c. mounting p.c. mounting p.c. mounting contact material options q r fixed terminal: silver plated copper alloy moving contact: silver plated copper alloy rating: 3 amps @ 120vac or 28vdc; 1 amp @ 250vac fixed terminal: copper alloy with gold plate over nickel plate moving contact: copper alloy with gold plate over nickel plate rating: 0.4 volt-amps (va) max. @ 20v max. (ac or dc)
|